brakehorsepower.net

Hi Tim.

Thanks for the invite, I hope to get up to see you all later on.
From what Darren said, it sounds like it could be a very intersting season for you both.

Cheers Pete

Thanks for the advice both of you. EBC say that these are the correct shoes for this car, and they are not much different. So assuming that they have been installed successfully to auto adjuster drums in the past then there must be some difference in the brake assembly fitted to my car, probaly in t...

I am trying to fit new brake shoes to the rear drums on my 2000 (built 1999) T16 +4. I thought this should be simple job. According to the EBC catalogue the same part no. 6380 should fit +4's from 94-2001 and +8s fom 94-2005. On trying to install however, the locating pins for the auto adjusters are...

Thanks Phil
Done that now.
Pete

Thanks Phillip.

Do you have to use any special cleaners before applying the silicone and how thick do reckon you need it?

Peter

Can anyone advise please. I am fitting 205/50 x15 tyres to 6" wires.
Is it ok to use 195x60 inner tubes? Has anyone got any experience of using silicone sealant to seal the centre rim instead of using a tube?

Thanks Pete.

Another alternative is to use a an inflatable airbag like the fireman use it comes in a small carry bag and is very light. I use one that Draper make. You have to stick the funnel up your exhaust pipe- it does work but is somewhat frightening to watch.

See you on Saturday

Pete Turner

Now Sold

Ford Kent Xflow 1600GT engine fitted with rare combustion chamber head, 711M block. Removed from my 1969 4/4 when I installed a 1700cc tuned engine. Good exterior condition and in good running order with plenty of power when removed. Turns over freely. Fitted with the original Weber 32DFM carb and m...

Hi,

Thanks for the information. After I read this I went for a trawl on the internet and came up with your webpage on this subject which could be useful to other competitors, so hope you don't mind - for the benefit of everyone else. http://www.gomog.com/allmorgan/shocks.html

cheers Pete Turner

Peter
I can assure you that photo was not digitally enhanced in any way.
Hope to be at Castle Combe next season.


Cheers Pete

Thanks Tim - Anymore of that and I will need more kleenex.
By the way, good result at Wiscombe, it must have been weird in the dry!

Cheers Pete

Hi Chris,

Yes I finally found one, had to go nearly up to the frozen north to get it though.
That should make 3 of this in this class now next season- look forward to seeing you.

Pete

Thanks for that Dave, I'll go with that.
Probaly see you in class 6 next season so I hope that you haven't been going too fast this year.

Pete

I am just about to install AVO adjustable dampers to my T16 +4
Has anyone got any suggestions for the settings please?
The rest of the suspension is standard at the moment.

Thanks- Peter Turner