Plus 8 wheel pcd and ET

Technical queries or suggestions
Post Reply
mike culmer
Posts: 13
Joined: Thu Jan 06, 2011 4:27 pm
Anti spam question: MSA

Plus 8 wheel pcd and ET

Post by mike culmer »

I'm on the search for some track day wheels. can someone confirm the PCD and required offset for a Plus 8? Its a 1988 model if that's important (and using a BTR axle).

Is the stud pattern shared witha ny other makes, i.e Ford?
Jonathan Edwards
Posts: 90
Joined: Sun May 11, 2008 7:20 pm

Re: Plus 8 wheel pcd and ET

Post by Jonathan Edwards »

Mike, Don't know but Brian at Techniques / Chas at MogSport will no doubt be able to advise.
User avatar
Andy Green
Morgan Class B
Posts: 1635
Joined: Fri Jan 21, 2005 5:32 pm

Re: Plus 8 wheel pcd and ET

Post by Andy Green »

Mike

If you need to buy some wheels then IMAGE 3 piece are the best and IMAGE have all the information (and lots of styles to choose)
peter rafter
Posts: 860
Joined: Fri Nov 17, 2006 8:37 pm

Re: Plus 8 wheel pcd and ET

Post by peter rafter »

Andy,
We are lambing at present, so i have an excuse for being up early
wot is your excuse?
peter
User avatar
Andy Green
Morgan Class B
Posts: 1635
Joined: Fri Jan 21, 2005 5:32 pm

Re: Plus 8 wheel pcd and ET

Post by Andy Green »

Peter

I am in Dubai,4 hours time change
Barry Sumner
Posts: 354
Joined: Mon Jan 24, 2005 6:01 pm

Re: Plus 8 wheel pcd and ET

Post by Barry Sumner »

Mike
I think you will find that the Morgan +8 5 stud wheels have a PCD of 127mm am not sure of the inset/offset. I will have another dig through all my info papers, according to my records 127mm wheels were fitted to the following
Sherpa K2 & 2.8 Van - 14"
Rover SD1 - 14"
Austin Taxi - 16"
so not a lot of choice!!!
Barry
Jim Mountain
Posts: 530
Joined: Sat Feb 18, 2006 10:18 pm

Re: Plus 8 wheel pcd and ET

Post by Jim Mountain »

Morris / Austin 1800 (landcrab) had the same pcd I think
mike culmer
Posts: 13
Joined: Thu Jan 06, 2011 4:27 pm
Anti spam question: MSA

Re: Plus 8 wheel pcd and ET

Post by mike culmer »

Thanks all, very helpfull and should help me sort my problem out.

Mike
Post Reply