Moss Box +8 manifolds

Technical queries or suggestions

Moss Box +8 manifolds

Postby Jonathan Edwards » Wed Nov 20, 2013 10:00 pm

Hi,
I have the original cast manifolds on my moss box +8 and the near side one has a crack around the rear port. I'm looking for advise on finding a replacement Are these available used / off what / part number??
I may consider tubular replacements but I quite like the single exhaust system and would ideally like to retain it. The left bank tube runs between the sump and the 'box and joins the right side before exiting on the right (near side) of the car. It's a LHD early '71 car.
Many thanks,
Jonathan
Jonathan Edwards
 
Posts: 90
Joined: Sun May 11, 2008 7:20 pm

Re: Moss Box +8 manifolds

Postby Phill Thomas » Thu Nov 21, 2013 1:17 pm

Jonathan, Tim Ayres did have a couple of cast manifolds off an injected 4.0L, no idea if they are suitable, give him a ring a New Elms.

Phill
User avatar
Phill Thomas
 
Posts: 168
Joined: Mon Oct 05, 2009 2:31 pm

Re: Moss Box +8 manifolds

Postby Robin Singleton » Thu Nov 21, 2013 6:38 pm

Hi Jonathan

I recently had a cast iron manifold repaired by Cast Iron Welding Services of Coalville..

They did a superb job.......took about 10 days

Cheers.

Robin
Robin Singleton
 
Posts: 91
Joined: Tue Feb 23, 2010 3:46 pm

Re: Moss Box +8 manifolds

Postby Jonathan Edwards » Fri Nov 22, 2013 4:28 pm

Thanks guys, most helpful.
Jonathan
Jonathan Edwards
 
Posts: 90
Joined: Sun May 11, 2008 7:20 pm


Return to How do I ?

Who is online

Users browsing this forum: No registered users and 1 guest