Moss Box +8 manifolds

Technical queries or suggestions
Post Reply
Jonathan Edwards
Posts: 90
Joined: Sun May 11, 2008 7:20 pm

Moss Box +8 manifolds

Post by Jonathan Edwards »

Hi,
I have the original cast manifolds on my moss box +8 and the near side one has a crack around the rear port. I'm looking for advise on finding a replacement Are these available used / off what / part number??
I may consider tubular replacements but I quite like the single exhaust system and would ideally like to retain it. The left bank tube runs between the sump and the 'box and joins the right side before exiting on the right (near side) of the car. It's a LHD early '71 car.
Many thanks,
Jonathan
User avatar
Phill Thomas
Posts: 193
Joined: Mon Oct 05, 2009 2:31 pm
Anti spam question: MSA

Re: Moss Box +8 manifolds

Post by Phill Thomas »

Jonathan, Tim Ayres did have a couple of cast manifolds off an injected 4.0L, no idea if they are suitable, give him a ring a New Elms.

Phill
Robin Singleton
Posts: 91
Joined: Tue Feb 23, 2010 3:46 pm
Anti spam question: MSA

Re: Moss Box +8 manifolds

Post by Robin Singleton »

Hi Jonathan

I recently had a cast iron manifold repaired by Cast Iron Welding Services of Coalville..

They did a superb job.......took about 10 days

Cheers.

Robin
Jonathan Edwards
Posts: 90
Joined: Sun May 11, 2008 7:20 pm

Re: Moss Box +8 manifolds

Post by Jonathan Edwards »

Thanks guys, most helpful.
Jonathan
Post Reply