Looking for a tuned TR4 head.
87mm bore...do they still exist...? .
Pressure testing proved mine is not cracked but i just don't trust that shape that certainly looks like a crack to me...
Jochem
looking for TR4 head
Moderator: Andy Downes
Forum rules
If your item sells or is withdrawn, please post a message to that effect.
If your item sells or is withdrawn, please post a message to that effect.
- Mark Shears
- Posts: 808
- Joined: Mon Oct 30, 2006 6:33 pm
- Location: Banbury,Oxfordshire, England
Re: looking for TR4 head
Hi Jochem,
Try Tony Sheach.
Email address: tr4.tony@virgin.net
Tell him I recommended you to contact him and that you are a Morgan man!
Cheers
Mark
Try Tony Sheach.
Email address: tr4.tony@virgin.net
Tell him I recommended you to contact him and that you are a Morgan man!
Cheers
Mark
-
- Posts: 70
- Joined: Thu Jan 04, 2007 6:39 pm
Re: looking for TR4 head
I now use heads from TR Enterprises (on the Plus 4 and the TR2) and would recommend them.
Mark
Mark
- Jochem Kentgens
- Posts: 160
- Joined: Fri Aug 31, 2007 8:44 am
Re: looking for TR4 head
Thanks Mark and Mark.
Am now in contact with them both and most probably Tony will supply a good used head and TR enterprises will prepare it to full race specs.
So this forum has been very helpful again!
Will not make the TT trophy unfortunately because this will all take some weeks.
so we will have to battle it all out in Assen 2012....??
Best wishes, Jochem
Am now in contact with them both and most probably Tony will supply a good used head and TR enterprises will prepare it to full race specs.
So this forum has been very helpful again!
Will not make the TT trophy unfortunately because this will all take some weeks.
so we will have to battle it all out in Assen 2012....??
Best wishes, Jochem