Parts Wanted

Private cars or parts for sale or wanted

Moderator: Andy Downes

Forum rules
If your item sells or is withdrawn, please post a message to that effect.
Post Reply
Jim Mountain
Posts: 449
Joined: Sat Feb 18, 2006 10:18 pm

Parts Wanted

Post by Jim Mountain »

Hi all, I'm after a few bits to finish off my 4/4.

A couple of factory door mirrors.

1 X bonnet catch, I had 4, but seem to have mislaid one!

A set of alloy, center lock wheels (5 or 6), 6" X 15", a set of revolutions would be nice.

Hood frame to fit a 70's 4/4, any condition as I'm going to cut it up.

Cheers Jim

Merlyn1000
Posts: 5
Joined: Fri Sep 21, 2018 9:13 am
Anti spam question: MSA

Re: Parts Wanted

Post by Merlyn1000 »

Hi Jim, if you're after 15" peg drive centre locks I have some. They are the revolution style but probably wider than you need. Easy to change rim width though...

User avatar
Richard Smith
Posts: 475
Joined: Sun May 15, 2005 3:45 pm
Location: Unstone Green, Derbyshire
Contact:

Re: Parts Wanted

Post by Richard Smith »

I have a hood frame...seems pretty decent, I am in N E Derbys...
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823

Jim Mountain
Posts: 449
Joined: Sat Feb 18, 2006 10:18 pm

Re: Parts Wanted

Post by Jim Mountain »

Merlyn1000 wrote:Hi Jim, if you're after 15" peg drive centre locks I have some. They are the revolution style but probably wider than you need. Easy to change rim width though...
Thanks, but was after spline drive, so I can keep the wires with a different set of tyres.

Cheers Jim

Jim Mountain
Posts: 449
Joined: Sat Feb 18, 2006 10:18 pm

Re: Parts Wanted

Post by Jim Mountain »

Richard Smith wrote:I have a hood frame...seems pretty decent, I am in N E Derbys...
Hi Richard, wish I'd seen this before the weekend I drove through Derby, on the way back from the Edinburgh trial at the weekend.

How much do you want for it?

Would you hold on to it until I'm up your way again?possibly before Christmas.

User avatar
Richard Smith
Posts: 475
Joined: Sun May 15, 2005 3:45 pm
Location: Unstone Green, Derbyshire
Contact:

Re: Parts Wanted

Post by Richard Smith »

Yep, no problems hanging on to it Jim....

Money? beer or whisky!

cheers
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823

Post Reply