WANTED - 1991 +8 Wheel Nuts

Private cars or parts for sale or wanted

Moderator: Andy Downes

Forum rules
If your item sells or is withdrawn, please post a message to that effect.
Post Reply
User avatar
Andy Downes
Posts: 602
Joined: Sun Jan 23, 2005 11:45 am
Anti spam question: MSA
Location: Sunny Staverton !

WANTED - 1991 +8 Wheel Nuts

Post by Andy Downes »

Hello, I'm looking for some wheel nuts in good condition for a 1991 +8 with Morgan alloy wheels.

I know there are new stainless steel ones available but the prices really make me wince !

So does anybody have some used ones to sell, either stainless or chromed left over from an upgrade ?

Please PM me.

Many Thanks
Andy
'Skipper'
User avatar
Philip Tisdall
Posts: 411
Joined: Thu Dec 15, 2005 6:10 pm
Location: Warwickshire

Re: WANTED - 1991 +8 Wheel Nuts

Post by Philip Tisdall »

Andy,
Try SCP specialist car products 01293851777 STD 7/16 unf I paid £1 each in 2018 or Select Auto Supplies Coventry 02476465845
Product DN2B 7/16 dome nut. .65p each. One set was for the normal alloy mog wheel the other was for minilite wheels as different offset. I cannot remember which.. I think...... the DN2B were for the alloy wheels
Philip
User avatar
Andy Downes
Posts: 602
Joined: Sun Jan 23, 2005 11:45 am
Anti spam question: MSA
Location: Sunny Staverton !

Re: WANTED - 1991 +8 Wheel Nuts

Post by Andy Downes »

Thanks Philip, I'll have a look at that, Ian Grimes at Track & Classic had suggested Select Auto Supplies.

I presume when you say "offset" you might mean "taper".

Many Thanks
Andy
'Skipper'
Barry Sumner
Posts: 354
Joined: Mon Jan 24, 2005 6:01 pm

Re: WANTED - 1991 +8 Wheel Nuts

Post by Barry Sumner »

Hi Andy
I note that Auto Supplies are Trade Only?
I managed to get some difficult to find nuts some years ago from www.speedshack.co.uk
They were most helpful
Barry
Jim Mountain
Posts: 530
Joined: Sat Feb 18, 2006 10:18 pm

Re: WANTED - 1991 +8 Wheel Nuts

Post by Jim Mountain »

Hi Andy, have you tried Terry Foxen? He can get hold of/has most things Morgan.

G.E.E Ltd,
Gigg Mill,
Old Bristol Road,
Nailsworth,
GL6 0JP

Telephone/fax: 44 (0)1453 832 113

Email giggmill@hotmail.com

Good luck Jim
User avatar
Andy Downes
Posts: 602
Joined: Sun Jan 23, 2005 11:45 am
Anti spam question: MSA
Location: Sunny Staverton !

Re: WANTED - 1991 +8 Wheel Nuts

Post by Andy Downes »

Thanks for your suggestion Jim - and to all the other suggestions.

I have now sourced some stainless steel replacements at a very reasonable cost (under £3 + VAT each) from - Select Auto Supplies 024 7646 5845.
Note the website says Trade customers only, but I think they're grateful for any business at present.
https://www.selectautosupplies.com/

SCP Specialist Car Products were again helpful but they do not supply suitable nuts.

My wheel nuts are 7/16" UNF with a radius (round) end seating on the wheel. The part numbers quoted by Philip above are for tapered ends.Select Auto Supplies were very helpful and managed to find me the last 20 items of their old stock at the correct 35mm length. They do have stock of a longer (45mm) nut which stick out a bit further but look OK, I used them for my spare wheel mounting.

Hopefully this may help somebody else.
Andy

Image
The new stainless steel nuts, Top 35mm Bottom 45mm

Image
One of my better original chromed nuts showing rounded Radius shaped end

Image
Both nuts fitted to spare wheel to illustrate the different lengths
'Skipper'
Barry Sumner
Posts: 354
Joined: Mon Jan 24, 2005 6:01 pm

Re: WANTED - 1991 +8 Wheel Nuts

Post by Barry Sumner »

Result
Good news
Post Reply