Page 1 of 1
Plus 8 wheel pcd and ET
Posted: Wed Jan 26, 2011 6:49 pm
by mike culmer
I'm on the search for some track day wheels. can someone confirm the PCD and required offset for a Plus 8? Its a 1988 model if that's important (and using a BTR axle).
Is the stud pattern shared witha ny other makes, i.e Ford?
Re: Plus 8 wheel pcd and ET
Posted: Thu Jan 27, 2011 8:15 pm
by Jonathan Edwards
Mike, Don't know but Brian at Techniques / Chas at MogSport will no doubt be able to advise.
Re: Plus 8 wheel pcd and ET
Posted: Fri Jan 28, 2011 5:36 am
by Andy Green
Mike
If you need to buy some wheels then IMAGE 3 piece are the best and IMAGE have all the information (and lots of styles to choose)
Re: Plus 8 wheel pcd and ET
Posted: Fri Jan 28, 2011 5:44 pm
by peter rafter
Andy,
We are lambing at present, so i have an excuse for being up early
wot is your excuse?
Re: Plus 8 wheel pcd and ET
Posted: Sat Jan 29, 2011 5:59 am
by Andy Green
Peter
I am in Dubai,4 hours time change
Re: Plus 8 wheel pcd and ET
Posted: Sat Jan 29, 2011 11:23 am
by Barry Sumner
Mike
I think you will find that the Morgan +8 5 stud wheels have a PCD of 127mm am not sure of the inset/offset. I will have another dig through all my info papers, according to my records 127mm wheels were fitted to the following
Sherpa K2 & 2.8 Van - 14"
Rover SD1 - 14"
Austin Taxi - 16"
so not a lot of choice!!!
Barry
Re: Plus 8 wheel pcd and ET
Posted: Sat Jan 29, 2011 6:04 pm
by Jim Mountain
Morris / Austin 1800 (landcrab) had the same pcd I think
Re: Plus 8 wheel pcd and ET
Posted: Sat Feb 05, 2011 12:06 pm
by mike culmer
Thanks all, very helpfull and should help me sort my problem out.
Mike