I am after a set of 4 stud 'solid' (not wire) wheels for my series V 4/4, 5" rim but would consider 4.5" - steel OK for historic events, so are Minilite but currently these are only available new as 5.5" rims.
I would have to have steel wheels strengthened for racing however I would need a good solid set as a base.
Thanks, Chris
Wanted 4/4 steel or alloy wheels
Moderator: Andy Downes
Forum rules
If your item sells or is withdrawn, please post a message to that effect.
If your item sells or is withdrawn, please post a message to that effect.
- jack bellinger
- Tech Comm
- Posts: 1240
- Joined: Fri Jan 21, 2005 7:46 am
- Location: London
- Contact:
Re: Wanted 4/4 steel or alloy wheels
I will look tonight I think I may have a set up in the attic
jack
jack
- jack bellinger
- Tech Comm
- Posts: 1240
- Joined: Fri Jan 21, 2005 7:46 am
- Location: London
- Contact:
Re: Wanted 4/4 steel or alloy wheels
Chris ... I have found 4 wheels.....tyre size says165/15 I am certain they are 5 inch.. they have 15 holes around the outside and 3 nipplews to hold on the hub caps.... I should have 5 but I have lent one to somebody about 10 years ago ... But I have forgotten Who !! so if anybody can remember
The tyres are shot but the wheels look in pretty good nick . 1 has overspray on it (no rust).
came of a 60s 4/4
jack
The tyres are shot but the wheels look in pretty good nick . 1 has overspray on it (no rust).
came of a 60s 4/4
jack
-
- Posts: 10
- Joined: Sun Feb 27, 2005 10:12 pm